Rega TT PSU Power Supply Upgrade

Home > Products > Analog - Accessories >

Rega TT PSU Power Supply Upgrade

Rega TT PSU Power Supply Upgrade


Not available online, please call to order.
210-805-9927

Rega TT PSU Power Supply Upgrade


Not available online, please call to order.
210-805-9927


  • Description


    The Rega TT PSU power supply offers a significant performance upgrade for the RP3, P3-24, P5 and P7 turntables.

    The all new TT PSU and motor anti-vibration circuit is a combination of the innovative P9 power supply along with an improved anti-vibration motor drive feeding the 24V AC synchronous motor. The TT PSU uses a remote "wall wart" transformer therefore keeping the sources of hum & noise well away from sensitive parts such as the cartridge and phono leads.

    The compact TT PSU uses exactly the same high stability crystal locked low distortion sine wave generator as is used in the heart of the P9 power supply. This, along with an efficient drive amplifier fed from stabilized DC power supply, generates a 24Volt AC balanced signal of less than 0.05% distortion, which is completely unaffected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable.

    The drive voltage for the motor is run along the power lead to the turntable motor, which also carries the 33/45-RPM DC relay control voltage used to activate the anti-vibration circuit.

    Important: The TT PSU can only be used with the RP3, P3-24, P5 and P7 turntables. It is not compatible with any other Rega or manufacturers turntables.

Product Ratings

Average Rating
No rating found.

Choose How Many Stars (5 Being the best)

Rega TT PSU Power Supply Upgrade


Not available online, please call to order.
210-805-9927


Description


The Rega TT PSU power supply offers a significant performance upgrade for the RP3, P3-24, P5 and P7 turntables.

The all new TT PSU and motor anti-vibration circuit is a combination of the innovative P9 power supply along with an improved anti-vibration motor drive feeding the 24V AC synchronous motor. The TT PSU uses a remote "wall wart" transformer therefore keeping the sources of hum & noise well away from sensitive parts such as the cartridge and phono leads.

The compact TT PSU uses exactly the same high stability crystal locked low distortion sine wave generator as is used in the heart of the P9 power supply. This, along with an efficient drive amplifier fed from stabilized DC power supply, generates a 24Volt AC balanced signal of less than 0.05% distortion, which is completely unaffected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable.

The drive voltage for the motor is run along the power lead to the turntable motor, which also carries the 33/45-RPM DC relay control voltage used to activate the anti-vibration circuit.

Important: The TT PSU can only be used with the RP3, P3-24, P5 and P7 turntables. It is not compatible with any other Rega or manufacturers turntables.