SME M2-9 Tonearm

SME M2-9 Tonearm


Not available online, please call to order.
210-805-9927

SME M2-9 Tonearm


Not available online, please call to order.
210-805-9927


  • Product Ratings (No Rating)

    Average Rating
    No rating found.

    Choose How Many Stars (5 Being the best)

  • Description

     

    MY TAKE: Without question, SME is an icon in the industry. With a seventy-year tradition of perfection in design, engineering and manufacture, SME has always been considered the pinnacle of analog art and science. Arguments may rage between analog devotees concerning “the best” turntable and tonearms, SME owners sit back and enjoy the music! My highest recommendation. – Galen Carol

     

    SME M2-9 -

    The Series M2 embraces three models the M2-9, M2-10 and M2-12 offering pivot-stylus dimensions covering virtually all turntable requirements.

    These arms offer at reasonable cost, meticulous build quality with all the most important features including lightweight stainless steel tonearm, detachable magnesium headshell with azimuth adjustment, tungsten balance weight, superb quality ball race bearings etc., and a level of stiffness and rigidity to suit all types of cartridge.

    These precision pick-up arms embody well tried SME principles and are suited to a broad range of cartridges including those of medium and low compliance.

     

    Build -

    The M2 shell is pressure die-cast in magnesium for lightness and rigidity.

    Series M2-9 is the standard arm having a pivot-stylus dimension of 233.2 mm (9.18”) and will therefore be the one most frequently used.

    Series M2-10 is identical except that the pivot-stylus dimension is 239.3 mm (9.42”) a difference that suits the layout of some decks.

    Series M2-12 has a pivot-stylus dimension of 308.8 mm (12.16”). Distortion caused by lateral tracking error is at least 25% less than possible with a nine or inch arm. However effective mass will be typically 12.0 grams. Also, a turntable designed for 12-inch arms must be selected.

     

    Damping -

    The internally damped tonearm of highly polished stainless steel provides sparkling uncoloured reproduction. A unique single element balance system caters for cartridges weighing 5 to 12 grams. After balancing tracking force is applied by forward movement of the weight ensuring the lowest system inertia. The weight moves on a precision screw thread with backlash eliminator allowing exact setting of vertical tracking force.

     

    Adjustments - 

    A collet of ingenious design affords ‘one-piece’ rigidity and allows azimuth correction to be made before final tightening.

    • 1.0 gram per revolution tungsten weight sub-graduated 0.25 and 0.025 gram moving on a precision screw with backlash eliminator.
    • 220mm (48”) D501 balanced audio lead. Engineered in the best camera quality with satin chrome finish Fluid damped lift/lower control.
    • Low friction, fully shielded races for both axes.
    • Sliding base for tracking adjustment.
    • Thumbwheel height adjustment.
    • Traditional pattern anti-skate.

     

    Specifications -

    Series M2 Dimensions Series M2-9    
    A – Distance from pivot to stylus 232.20mm    
    B – Distance from pivot to turntable centre 215.40mm    
    C – Cartridge fixing centres 12.70mm    
    F – Overhang 17.80mm    
    G – Height above mounting surface 87.0mm max
    63.0mm min
       
        *Note: Spacer P1, part no. 3823/IV is required when the turntable surface
    is more than 41.30mm above the surface on which the arm is mounted
         
    H – Height of record surface above mounting surface 67.40mm max
    43.40mm min
       
    J – Depth below mounting surface 46.0mm    
    K – Radial clearance for balance weight 51.0mm    
    + – Tracking adjustment 12.70mm    

     

Product Ratings

Average Rating
No rating found.

Choose How Many Stars (5 Being the best)

SME M2-9 Tonearm


Not available online, please call to order.
210-805-9927


Description

 

MY TAKE: Without question, SME is an icon in the industry. With a seventy-year tradition of perfection in design, engineering and manufacture, SME has always been considered the pinnacle of analog art and science. Arguments may rage between analog devotees concerning “the best” turntable and tonearms, SME owners sit back and enjoy the music! My highest recommendation. – Galen Carol

 

SME M2-9 -

The Series M2 embraces three models the M2-9, M2-10 and M2-12 offering pivot-stylus dimensions covering virtually all turntable requirements.

These arms offer at reasonable cost, meticulous build quality with all the most important features including lightweight stainless steel tonearm, detachable magnesium headshell with azimuth adjustment, tungsten balance weight, superb quality ball race bearings etc., and a level of stiffness and rigidity to suit all types of cartridge.

These precision pick-up arms embody well tried SME principles and are suited to a broad range of cartridges including those of medium and low compliance.

 

Build -

The M2 shell is pressure die-cast in magnesium for lightness and rigidity.

Series M2-9 is the standard arm having a pivot-stylus dimension of 233.2 mm (9.18”) and will therefore be the one most frequently used.

Series M2-10 is identical except that the pivot-stylus dimension is 239.3 mm (9.42”) a difference that suits the layout of some decks.

Series M2-12 has a pivot-stylus dimension of 308.8 mm (12.16”). Distortion caused by lateral tracking error is at least 25% less than possible with a nine or inch arm. However effective mass will be typically 12.0 grams. Also, a turntable designed for 12-inch arms must be selected.

 

Damping -

The internally damped tonearm of highly polished stainless steel provides sparkling uncoloured reproduction. A unique single element balance system caters for cartridges weighing 5 to 12 grams. After balancing tracking force is applied by forward movement of the weight ensuring the lowest system inertia. The weight moves on a precision screw thread with backlash eliminator allowing exact setting of vertical tracking force.

 

Adjustments - 

A collet of ingenious design affords ‘one-piece’ rigidity and allows azimuth correction to be made before final tightening.

  • 1.0 gram per revolution tungsten weight sub-graduated 0.25 and 0.025 gram moving on a precision screw with backlash eliminator.
  • 220mm (48”) D501 balanced audio lead. Engineered in the best camera quality with satin chrome finish Fluid damped lift/lower control.
  • Low friction, fully shielded races for both axes.
  • Sliding base for tracking adjustment.
  • Thumbwheel height adjustment.
  • Traditional pattern anti-skate.

 

Specifications -

Series M2 Dimensions Series M2-9    
A – Distance from pivot to stylus 232.20mm    
B – Distance from pivot to turntable centre 215.40mm    
C – Cartridge fixing centres 12.70mm    
F – Overhang 17.80mm    
G – Height above mounting surface 87.0mm max
63.0mm min
   
    *Note: Spacer P1, part no. 3823/IV is required when the turntable surface
is more than 41.30mm above the surface on which the arm is mounted
     
H – Height of record surface above mounting surface 67.40mm max
43.40mm min
   
J – Depth below mounting surface 46.0mm    
K – Radial clearance for balance weight 51.0mm    
+ – Tracking adjustment 12.70mm