PS Audio PerfectWave Power Plant 10

Home > Products > Power Line Conditioning >

PS Audio PerfectWave Power Plant 10

PS Audio PerfectWave Power Plant 10

$5,495.00 Free Shipping!

Free Shipping!
Loading...

PS Audio PerfectWave Power Plant 10

$5,495.00 Free Shipping!

Free Shipping!
Loading...

  • Description

    PS Audio's new and most advanced AC power regenerator, the PerfectWave Power Plant 10 is the ultimate device for perfecting the power to your AV equipment. At the PerfectWave Power Plant 10’s core, an internal high current analog amplifier produces ultra low distortion, ultra low output impedance, and highly regulated new AC power for connected equipment. Sine wave enhancement technologies from the P10 including MultiWave and CleanWave provide unparalleled control of the Power Plants for hands-on control settings for optimum performance, system specific. The PerfectWave Power Plant 10 delivers up to 1000 watts of continuous power and 50 amps of instantaneous current delivery.

    The P10 helps keep your system running and everything green - Our new network technology on board provides unprecedented control and monitoring of all your connected devices. Automatically reboot routers, modems, and network devices when Internet dropouts occur. Schedule devices to power on and off automatically optimizing power consumption in your system. Receive emails automatically when power occurrences occur, as the PerfectWave Premier P10 is automatically reacting on its own; all made possible by PS connected technology and PS Audio’s unique Globalnet servers.

    Once your system is powered by a P10 Power Plant all you or you need to do is go to the web through any web enabled device, including a Blackberry or iPhone, and access the P10’s control panel if you wish. From the P10’s control panel any connected equipment can be rebooted, turned on or off, or have its status checked. It’s that simple.

    Monitor your system’s heartbeat - The P10 will monitor your power line quality and report any problems to you through the web page, text alerts or emails sent anywhere you wish. It’s up to you. The P10’s real-time and on-line measurement system includes surges, voltage levels, power usage and power quality as measured by THD (Total Harmonic Distortion) on the line.

    The data is stored on our servers and available via the web interface for the P10. Customers and their designated dealers can look at power quality over time, or drill down to specific times of day to find out if there’s a problem involving the home’s power. Our research over the years has shown that sagging voltages, high distortion and multiple brownouts are occurring more than one might think. With the installation of a P10 in the system, you can accurately record events and present them to the utility company for repair or just keep a log.

    With a P10 system installed, not only can you check system and power line status from anywhere in the world, get emails sent to you from the device (if you want) and be assured you’re always connected to the internet, but you will also be able to go a lot greener than ever before. The P10 will allow you to schedule system ‘vacations’ or down time so you’re not burning power when you don’t need to. This can be in the middle of the night, or when you’re on vacation and when you’re ready, the P10 turns everything back on for you zone-by-zone. Perhaps there are a few critical components you want to remain on, but others are OK to shut down and save power. No problem.

    To access this feature there is a simple graphical calendar. Simply click on the dates you want the system to turn off and the dates you want it to come back on and everything will be ready for you upon your return. You can schedule your equipment (some or all) to be warmed up and ready to. And if your equipment needs an IR command to actually get it out of standby, that’s no problem either. The P10 can easily send IR commands on schedule as well.

    Input naming and customization -  With 5 zones available (on US units) on the P10 it is important to know which piece of equipment is being powered by which zone so you can access from either the front panel or the web interface. On a P10 it’s easy. You can name each zone anything you wish via the P10’s easy to use graphical interface available online or through the front panel touch screen.

    Email alerts - Some power quality problems can be serious, such as repeated brown or blackouts, high levels of surges or equipment downtime. Many customers will want to know right away if their home has a problem so they can take immediate action.
The P10 is setup to generate email and text alerts to any designated recipient.

    IR and trigger controls - In the back of the P10 there are two mini jacks that can be assigned as either an IR input or output or a DC trigger transmitter or receiver. For the IR capabilities, the P10 can be assigned up to 15 separate IR commands for any zone and these IR broadcasts can be triggered by any number of assignable events. This helps P10 maintain complete control over not only the AC power to your system, but by directly controlling that same equipment through a remote control.

    If you have equipment that needs a DC trigger to turn it on or off remotely, you can assign one of the mini jacks to be either the sending or receiving unit for these commands and remotely turn
    on/off equipment or have that equipment remotely turn on/off the P10.
     

Product Ratings

Average Rating
No rating found.

Choose How Many Stars (5 Being the best)

PS Audio PerfectWave Power Plant 10

$5,495.00 Free Shipping!

Free Shipping!
Loading...

Description

PS Audio's new and most advanced AC power regenerator, the PerfectWave Power Plant 10 is the ultimate device for perfecting the power to your AV equipment. At the PerfectWave Power Plant 10’s core, an internal high current analog amplifier produces ultra low distortion, ultra low output impedance, and highly regulated new AC power for connected equipment. Sine wave enhancement technologies from the P10 including MultiWave and CleanWave provide unparalleled control of the Power Plants for hands-on control settings for optimum performance, system specific. The PerfectWave Power Plant 10 delivers up to 1000 watts of continuous power and 50 amps of instantaneous current delivery.

The P10 helps keep your system running and everything green - Our new network technology on board provides unprecedented control and monitoring of all your connected devices. Automatically reboot routers, modems, and network devices when Internet dropouts occur. Schedule devices to power on and off automatically optimizing power consumption in your system. Receive emails automatically when power occurrences occur, as the PerfectWave Premier P10 is automatically reacting on its own; all made possible by PS connected technology and PS Audio’s unique Globalnet servers.

Once your system is powered by a P10 Power Plant all you or you need to do is go to the web through any web enabled device, including a Blackberry or iPhone, and access the P10’s control panel if you wish. From the P10’s control panel any connected equipment can be rebooted, turned on or off, or have its status checked. It’s that simple.

Monitor your system’s heartbeat - The P10 will monitor your power line quality and report any problems to you through the web page, text alerts or emails sent anywhere you wish. It’s up to you. The P10’s real-time and on-line measurement system includes surges, voltage levels, power usage and power quality as measured by THD (Total Harmonic Distortion) on the line.

The data is stored on our servers and available via the web interface for the P10. Customers and their designated dealers can look at power quality over time, or drill down to specific times of day to find out if there’s a problem involving the home’s power. Our research over the years has shown that sagging voltages, high distortion and multiple brownouts are occurring more than one might think. With the installation of a P10 in the system, you can accurately record events and present them to the utility company for repair or just keep a log.

With a P10 system installed, not only can you check system and power line status from anywhere in the world, get emails sent to you from the device (if you want) and be assured you’re always connected to the internet, but you will also be able to go a lot greener than ever before. The P10 will allow you to schedule system ‘vacations’ or down time so you’re not burning power when you don’t need to. This can be in the middle of the night, or when you’re on vacation and when you’re ready, the P10 turns everything back on for you zone-by-zone. Perhaps there are a few critical components you want to remain on, but others are OK to shut down and save power. No problem.

To access this feature there is a simple graphical calendar. Simply click on the dates you want the system to turn off and the dates you want it to come back on and everything will be ready for you upon your return. You can schedule your equipment (some or all) to be warmed up and ready to. And if your equipment needs an IR command to actually get it out of standby, that’s no problem either. The P10 can easily send IR commands on schedule as well.

Input naming and customization -  With 5 zones available (on US units) on the P10 it is important to know which piece of equipment is being powered by which zone so you can access from either the front panel or the web interface. On a P10 it’s easy. You can name each zone anything you wish via the P10’s easy to use graphical interface available online or through the front panel touch screen.

Email alerts - Some power quality problems can be serious, such as repeated brown or blackouts, high levels of surges or equipment downtime. Many customers will want to know right away if their home has a problem so they can take immediate action.
The P10 is setup to generate email and text alerts to any designated recipient.

IR and trigger controls - In the back of the P10 there are two mini jacks that can be assigned as either an IR input or output or a DC trigger transmitter or receiver. For the IR capabilities, the P10 can be assigned up to 15 separate IR commands for any zone and these IR broadcasts can be triggered by any number of assignable events. This helps P10 maintain complete control over not only the AC power to your system, but by directly controlling that same equipment through a remote control.

If you have equipment that needs a DC trigger to turn it on or off remotely, you can assign one of the mini jacks to be either the sending or receiving unit for these commands and remotely turn
on/off equipment or have that equipment remotely turn on/off the P10.