Jolida Fusion 32502S Full Tube Integrated Amplifier

Home > Products > Amplifier - Integrated >Amplifier, Preamplifier - Tube >

Jolida Fusion 32502S Full Tube Integrated Amplifier

Jolida Fusion 32502S Full Tube Integrated Amplifier

$1,499.00 Free Shipping!

Free Shipping!
Loading...

Jolida Fusion 32502S Full Tube Integrated Amplifier

$1,499.00 Free Shipping!

Free Shipping!
Loading...

Add Recommended Accessories

Shunyata Venom HC Power Cord, 5’
$289.00 Free Shipping!
Loading...

  • Description

    MY TAKE:

    Jolida offers some of the best sounding highest value tube gear on the market, and have for years. They have a long and proven track record and are recognized around the world for their wide range of outstanding products. Looking for cost effective tube gear? Look no further than Jolida. – Galen Carol


    The new Fusion 3502S from Jolida represents a new direction in styling for the company and is a step up from the JD 502CRC and the JD 302CRC. The circuit has been redesigned and component parts have been upgraded to include ESA clarity coupling caps, high speed diodes and naked Z resistors on the feedback loop which lowers the noise floor and enhances air and dimensionality. Flexibility is a bypass that allows the amp to be utilized as a power amp and the ability to switch between EL34 and 6550 vacuum tubes.


    Listed below are the specifications. What the numbers don’t reveal is the rich, warm dimensional sound that makes tubes so desirable. Listen to a JoLida, and you will be surprised at how much music you have been missing!
     

    SPECIFICATIONS:

    Rated Output Power:  60 W per channel at 8 ohms, 25Hz to 60KHz,  50 W per channel at 8 ohms, 28Hz to 72KHz

    Maximum Power Output: 85 W per channel at 8 ohms,  1KHz with 6550 Tubes, 75 W per channel at 8 ohms,  1KHz with EL34 Tubes

    Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz   + 1dB

    Bandwidth:  15Hz to 80KHz + 3dB; 0dB 60 W 1KHz

    Distortion THD:  Less than 1% at 20 V output, 28Hz to 15KHz

    Circuit Type: Ultra Linear, Class AB

    Input Impedance: 100Kohms

    Input Sensitivity:  600mV at 1KHz for 50/60 watt output

    Output Impedance: 4 ohms and 8 ohms

    Negative Feedback: Less than 5 dB

    Noise and Hum: 85dB below rated output

    Tube Complement: 4 pcs. EL34 or 6550 power output; 2 pcs. 12AX7A/ECC83 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers.

    Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 450 watts maximum (220 VAC  50Hz option)

    Dimensions: 17 inches (43cm) wide by 15 inches (38cm) deep by 7.5 inches (19 cm)  high

    Weight: 51 pounds (18 Kg) net, approximately 55 pounds (21 Kg) packaged

    Warranty: Two year limited parts and labor. One year or 1000 hours whichever  comes first on Jolida Tubes.                                                             

    Bias Settings: 400 millivolts + 40 mV For EL 34s ot 500 millivolts + 50 mV for 6550s 

    Fuse: 110 - 120 VAC, 6.3 Amp slo Blo; 200 - 240 VAC, 3.15 Amp slo Blo,   Size 5mm X 20mm

     

    FEATURES: 

    * Fully Integrated Stereo Amplifier: Can be ordered with 6550, KT 120, Kt 150 or EL34 vacuum tubes. Input 600mV driving 60 watts, maximum 85 watts output with 6550 power output tubes. Input 600mV driving 50 watts, maximum 75 watts output with E:34 power output tubes.

    * Multiple Inputs: Front mounted selector switch-CD, DVD, Tuner and Aux. (for TV, VCR or Computer

    * Features: Bypass or power amp setting, Switching from EL34 to 6550 tubes. Fixed and Variable out.

    * Custom Wound Audio Transformers with a core of German grain oriented silicon steel. 15th generation proprietary design.  Secondary can be configured for a 4 ohm or 8 ohm load.

    * Top panel bias testing terminal with bias adjustment controls. EZ- biasing: turn the screw until the light goes on and the tube is biased. No resistors in the signal path.      

    * Connector, Ultra Pure Wire add on options.

    * Low Feedback Design: Only 5 dB

Product Ratings

Average Rating
432125

Choose How Many Stars (5 Being the best)

Jolida Fusion 32502S Full Tube Integrated Amplifier

$1,499.00 Free Shipping!

Free Shipping!
Loading...

Add Recommended Accessories

Shunyata Venom HC Power Cord, 5’
$289.00 Free Shipping!
Loading...

Description

MY TAKE:

Jolida offers some of the best sounding highest value tube gear on the market, and have for years. They have a long and proven track record and are recognized around the world for their wide range of outstanding products. Looking for cost effective tube gear? Look no further than Jolida. – Galen Carol


The new Fusion 3502S from Jolida represents a new direction in styling for the company and is a step up from the JD 502CRC and the JD 302CRC. The circuit has been redesigned and component parts have been upgraded to include ESA clarity coupling caps, high speed diodes and naked Z resistors on the feedback loop which lowers the noise floor and enhances air and dimensionality. Flexibility is a bypass that allows the amp to be utilized as a power amp and the ability to switch between EL34 and 6550 vacuum tubes.


Listed below are the specifications. What the numbers don’t reveal is the rich, warm dimensional sound that makes tubes so desirable. Listen to a JoLida, and you will be surprised at how much music you have been missing!
 

SPECIFICATIONS:

Rated Output Power:  60 W per channel at 8 ohms, 25Hz to 60KHz,  50 W per channel at 8 ohms, 28Hz to 72KHz

Maximum Power Output: 85 W per channel at 8 ohms,  1KHz with 6550 Tubes, 75 W per channel at 8 ohms,  1KHz with EL34 Tubes

Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz   + 1dB

Bandwidth:  15Hz to 80KHz + 3dB; 0dB 60 W 1KHz

Distortion THD:  Less than 1% at 20 V output, 28Hz to 15KHz

Circuit Type: Ultra Linear, Class AB

Input Impedance: 100Kohms

Input Sensitivity:  600mV at 1KHz for 50/60 watt output

Output Impedance: 4 ohms and 8 ohms

Negative Feedback: Less than 5 dB

Noise and Hum: 85dB below rated output

Tube Complement: 4 pcs. EL34 or 6550 power output; 2 pcs. 12AX7A/ECC83 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers.

Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 450 watts maximum (220 VAC  50Hz option)

Dimensions: 17 inches (43cm) wide by 15 inches (38cm) deep by 7.5 inches (19 cm)  high

Weight: 51 pounds (18 Kg) net, approximately 55 pounds (21 Kg) packaged

Warranty: Two year limited parts and labor. One year or 1000 hours whichever  comes first on Jolida Tubes.                                                             

Bias Settings: 400 millivolts + 40 mV For EL 34s ot 500 millivolts + 50 mV for 6550s 

Fuse: 110 - 120 VAC, 6.3 Amp slo Blo; 200 - 240 VAC, 3.15 Amp slo Blo,   Size 5mm X 20mm

 

FEATURES: 

* Fully Integrated Stereo Amplifier: Can be ordered with 6550, KT 120, Kt 150 or EL34 vacuum tubes. Input 600mV driving 60 watts, maximum 85 watts output with 6550 power output tubes. Input 600mV driving 50 watts, maximum 75 watts output with E:34 power output tubes.

* Multiple Inputs: Front mounted selector switch-CD, DVD, Tuner and Aux. (for TV, VCR or Computer

* Features: Bypass or power amp setting, Switching from EL34 to 6550 tubes. Fixed and Variable out.

* Custom Wound Audio Transformers with a core of German grain oriented silicon steel. 15th generation proprietary design.  Secondary can be configured for a 4 ohm or 8 ohm load.

* Top panel bias testing terminal with bias adjustment controls. EZ- biasing: turn the screw until the light goes on and the tube is biased. No resistors in the signal path.      

* Connector, Ultra Pure Wire add on options.

* Low Feedback Design: Only 5 dB