Electronics - Tube

[ Larger View ]

Quicsilver SET Mono Tube Amplifiers

The Quicksilver entry into single-ended amplifier design uses no global feedback and yet offers lower distortion, wider frequency response and higher damping than standard single-ended designs. The parts list includes polypropylene and foil capacitors, non-inductive wirewound resistors, nickel-core chokes and Quicksilver-designed power and output transformers. As with all Quicksilver amplifiers, many different output tubes may be used. The power bandwidth extends to 20 Hz and the 9 watts output has less than 1 db of compression. Each output transformer is individually tested and categorized so that each pair of amps will have closely matched output characteristics. The amplifiers are finished in carbide black with nickel chrome transformer covers.

* Hand wired, point to point circuitry
* Handcrafted in the U.S.A.
* 9 watts into four or eight Ohms
* KT-88 output tubes, 6H30 driver/input, 5AR4 regulator
* Low (2.4V) input sensitivity will not amplify noise from front-end components
* Optional nickel chrome chassis
* Handcrafted in the U.S.A.

	Label		Our Price

	Quicksilver SET		$2599.00

Quantity:

< Return to Electronics - Tube

All contents © 2007 by Galen Carol Audio San Antonio, Texas USA
and may not be copied or reproduced without permission. Website by Stylefish.