Electronics - Tube

[ Larger View ]

Quicksilver Triode Tube Mono Amplifiers

An all new Quicksilver amplifier makes its debut. The only amplifier of its kind in their lineup, the new model runs in triode configuration. The aptly named Triode Amplifier uses a pair of KT-88 tubes producing 50 delicious triode watts, enough to drive a wide range of speakers.

Designer, Mike Sanders believes in solid engineering and proven concepts over current fads. His amplifiers are simple in design, conservative in execution and constructed using the time honored concept of point to point wiring - all by hand, and 100% made in the USA. It’s this no nonsense approach that has earned him the respect of many and established a large group of devoted fans.
No question, the new Triode Amp will further his reputation!

The Quicksilver Triode Amp operates with a wider selection of tubes than any previous Quicksilver amplifier. Fit it with 6550s, EL34s, 6L6s, or any of the KT-series output tubes, and use any input or driver tube with a 12-volt filament and standard plate-grid cathode connections (12AX7, 12AT7, 12AU7, etc.). An on-board bias meter allows individual adjustment of each output tube, and the driver stage, direct-coupled to the output tubes, holds each tube to the selected bias, reducing fluctuations and improving tube life. With low-noise power supplies and circuitry, the Triode Amp sounds clean even with very efficient speakers, and triode operation from input to output makes for pristine sound quality at very low levels but still provides enough power to drive less efficient speakers. The wide range of output tube bias settings lets you adjust the Triode Amp to a variety of speakers. A power supply with two power transformers and 180 Joules of energy storage provides effortless dynamic response, transmitting the full musical impact of sudden shifts from soft to loud. A modification of the sleek look of the V4, the Triode Amp has a chrome-plated chassis and carbide black transformer cover.

We think you'll like this one!

Specifications:

Power Output: 50 watts into 4 or 8 ohms from 20 Hz to 20 KHZ
Power Bandwidth: 10 Hz to 60 KHz
Input Sensitivity: 2.25 volts
Input Impedance: 100 K ohms
Gain: 18.5 db on 8 ohm tap
Power Consumption: 115 watts at idle 250 watts at full power
Dimensions: 15” wide x 9 ¾” deep x 6 ½” high
Finish: Chrome chassis, carbide black transformer cover
Weight: 36 lbs., 39 lbs. shipping
Tube Complement: 1 - 12AX7, 1 - 12BH7 2 - EL34, KT88, 6L6, or 6550
Warranty 3 years parts and labor, tubes 90 days

Manual

	Label		Our Price

	Quicksilver Triode Amps		$3350.00

Quantity:

< Return to Electronics - Tube

All contents © 2007 by Galen Carol Audio San Antonio, Texas USA
and may not be copied or reproduced without permission. Website by Stylefish.