 [ Larger View ] [ Larger View ]
 |
|
Michell TecnoArm Tonearm
The Michell TecnoArm is a fundamental mechanical rebuild of the well-known RB250 tonearm. The arm tube is first bead-blasted and perforated which disperses structural resonances and yields a lower effective mass. The arm wand is internally damped to reduce resonance further, and the headshell is machined flat, to allow true azimuth relative to the bearing cradle. Wiring is replaced using a single piece of unbroken wire from headshell leads all the way out to the male RCAs. After modification the bearings are re-adjusted for highest possible performance, according to original Rega procedures.
The result is a marvelous tonearm that dramatically improves upon the RB-250.Our #1 pick in this price range. Strongly recommended!
"Brilliant evolution of a sublime design - vinyl doesn't come much better than this" - Hi-Fi World
FREE SHIPPING!
• One-piece perforated arm casting with internal foam damping
• Proprietary silver litz cable in a continuous run from cartridge to amplifier
• PTFE dielectric, metal braided shielding, separate ground wire
• Silver-plated cartridge clips and phono plugs
• Two counterweights, matching cartridges of 4-7g and 7-13g
• Vertical tracking force adjuster in steps of 0.1g
• Vertical tracking angle adjuster
• Finger locknut for easy arm removal or VTA adjustment
• Three year warranty
Click here for a review of this product.
Related Products
Michell Gyro SE Turntable
Michell TecnoDec Turntable with Rega RB-250 Special Tonearm
|
